Micro SD Case & MicroSD Card Case
Copyright Claim
Micro SD Case & MicroSD Card Case
Boost
127
208
103
Print Profile(3)
0.2mm layer, 2 walls, 15% infill
Designer
26 min
1 plate
0.2mm layer, 2 walls, 10% infill
23 min
1 plate
0.2mm layer, 2 walls, 15% infill
32 min
1 plate
Boost
127
208
103
4
602
454
Released
Description
This case can hold 10 micro SD and one regular SD (or an adaptor). This relies on fairly tight tolerances, so if you experience any filament shrinkage you should consider upscaling the model slightly.
Comment & Rating (103)
All
Print Profile
0.2mm layer, 2 walls, 10% infill
absolutely perfect
1
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
Nicely printed. printed on eSun PLA Matte White
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
peut être un peu plus ajuster pour que la carte tienne bien en place, c'est nickel avec la scandisk, trop de jeu avec la gigastone
(Edited)
The designer has replied
0
Reply
The print profile is slightly upscaled. Using the original file will make it tighter which usually holds the cards in place.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
great
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
quick print, everything thing for great. SD cards have space to move around and would fall out with our the adapter lid, but "lid" feels very secure.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Bambu Lab PLA Basic Black. Awesome! Thank you!
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
Worked great in ASA at 102% size to compensate for shrinkage. Thanks for the tip!
0
Reply
Me encanta!!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
very high quality, good work!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Printed PERFECTLY. I made one for me and one for my boyfriend, both turned out excellent. Thanks for the file!
0
Reply
License
This work is licensed under a
Creative Commons Attribution
Related Models
© 2024 MakerWorld